“when it boots up, as soon as everything is up and ready, it goes to sleep with a blank screen.”
7 messages — Last update 08 August 2005
|
“Has anyone run one of these powerbook off a external battery or other true dc supply and noticed if the noise is still there?”
3 messages — Last update 24 June 2005
|
“I have a Umax 300Mhz clone and all I get is a grey screen. Once I saw it was starting OS 9.1.”
3 messages — Last update 02 May 2005
|
“It takes several plugging in and out for powerbook to became normally turned of, then I can turn it on.”
2 messages — Last update 09 February 2005
|
“Apple System Profiler reports that sleep is disabled because of the PCI card installation - even when there is no powered-up unit connected to the card.”
2 messages — Last update 29 January 2005
|
“Runs ok as long as the ac adapter is plugged in, but powers-off as soon as it's unplugged.”
2 messages — Last update 25 December 2004
|
“at midnight exactly, my hard drive wakes up from sleep mode.”
4 messages — Last update 10 December 2004
|
“Your computer cannot be put into sleep until the case is closed. Please close the case and try again.”
17 messages — Last update 20 November 2004
|
“The HD spins a bit, the monitor is black and nothing happens. Zap the PRAM and everything launches fine.”
11 messages — Last update 02 November 2004
|
“It ignores the sleep timer, crashes from a menu sleep command, crashes when the cover is closed.”
4 messages — Last update 27 October 2004
|
