The conversation on this page has been archived and is no longer active.

Instructions for changing Power Supply on G4 Quicksilver?

Message #1 - Posted 2006/12/22 - Steinar Moum

Can anyone give me a pointer to instructions for releasing the old power supply in the easiest way? The first look indicated lots of screws, a more simple way would be fine.

Yours

sm

Message #2 - Posted 2006/12/22 - Christoph Gartmann

Previously, Steinar Moum <steinar.moum@usit.uio.no> writes:

Can anyone give me a pointer to instructions for releasing the old power supply in the easiest way? The first look indicated lots of screws, a more simple way would be fine.

There are only two screws: one in the upper middle of the rear chassis and one inside the Mac in front of the power supply. Once you removed these two screws, shift the powersupply towards the front side of the Mac.

Regards,
Christoph Gartmann

Max-Planck-Institut fuer Phone : +49-761-5108-464 Fax: -452 Immunbiologie
Postfach 1169 Internet: gartmann@immunbio dot mpg dot de D-79011 Freiburg, Germany
http://www.immunbio.mpg.de/home/menue.html

Message #3 - Posted 2006/12/22 - Steinar Moum

Previously, Christoph Gartmann wrote:

Previously, Steinar Moum <steinar.moum@usit.uio.no> writes:

Can anyone give me a pointer to instructions for releasing the old power supply in the easiest way? The first look indicated lots of screws, a more simple way would be fine.

There are only two screws: one in the upper middle of the rear chassis and one inside the Mac in front of the power supply. Once you removed these two screws, shift the powersupply towards the front side of the Mac.

Regards,
Christoph Gartmann

Thanks, great to hear!

Yours

sm

Need Help? Have a Question?

Looking for more help, comments, and answers?

Ask your questions on Ask Different. Ask Different is a community of Apple users ready to help.